The L4V Hook Lock is a mechanical deadlock operating independently from the manufacturers' locking system. A deadlocking hook bolt engages into its opposing body section. Operated by its high-security external key under full control of the driver. Suitable for owner-drivers or applications where the driver can be relied upon to operate the lock.
Recommended Fitting Position
We recommend an L4V Hook lock fitted high in the side load door and a L4V Hook lock fitted in the high position on the rear barn doors.
The L4V Deadlock is a mechanical deadlock operating independently from the manufacturers’ locking system. It is very similar to the L4V Hook Lock however this lock engages a ‘straight bolt’ (20mm-50mm) into its opposing body section. Operated by its high-security external key under full control of the driver. Suitable for owner-drivers or applications where the driver can be relied upon to operate the lock. The L4V Deadlock is recommended for use on the vehicles cab doors.
The L4V Slamlock is primarily designed for couriers, multi-drop delivery drivers and any operations where a driver may be regularly in and out of a loading area throughout the day.
The L4V Slamlock safeguards against the driver forgetting to lock the doors. Once the door is shut it locks automatically and can only be opened using the L4V Slamlock key, reducing the chances of theft.
The L4V Statement Lock mounts externally to the doors of the vehicle, bracing them together while providing an effective visual deterrent. When fitted higher in the door it helps to reduce the risk of the door being bent down. As a deadlock working independently from the manufacturers’ locking system, it offers flexibility to the operator of the vehicle allowing them to use this extra security when required.
L4V Anti-Peel Kits have been developed to reduce the risk of the common ‘peel and steal’ type of attack. Designed to reduce door peeling, this solution is fitted to the front edge of the vehicle’s side load door. We recommend using this product in conjunction with an L4V Hook Lock in the high position of the rear end of the same side load door.
Available for the N/S sliding door.
Available in both HIGH and LOW positions.
Break-ins can occur as a result of the handle being spiked to gain access to the internal mechanisms that open the door. The L4V Handle Shields are door specific and reduce the risk of this method of attack.
Registered No: 04838956, Vat No: 820 5312 72
Registered Office: as the above address Locks 4 Vans and the L4V Logo are registered trademarks of Locks 4 Vans Limited.
Disclaimer: Locks 4 Vans strongly recommend that the installation of aftermarket van security solutions are implemented by an experienced lock technician due to the irreversible adjustments being made to the vehicle. Poorly fitted locks could cause damage beyond repair and invalidate your vehicle and lock warranty.